SIMONA^® Low Friction PE

Proprietary low coefficient of friction formula integrated directly into the material, the sheet combines slick surface area with UV stability and inherent toughness for increased productivity and long product life.

Areas of use:

Chemical and Corrosion Resistance
Food and Beverage Processing
Aviation and Transportation
Marine

Machining:

Overview material parameters SIMONA^® Low Friction PE

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

0.94

Water Absorption (%)
D570

<0.01

Tensile Strength at yield (psi)
D638

3,500

Elongation at break (%)
D638

650

Flexural Modulus (psi)
D790

160,000

Izod Impact (notched) (ft.lbs./in.)
D256

no break

Low Temperature Brittleness (°F)
D747

-50

Shore Hardness D
D2240

Coefficient of Thermal Expansion (in./in./°F)
D696

6.7 x 10^-5

Heat Deflection Temperature at 66 psi (°F)
D648

163

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® Low Friction PE

Areas of use:

Chemical and Corrosion Resistance
Food and Beverage Processing
Aviation and Transportation
Marine

Machining:

Characteristics

Downloads

back to overview

SIMONA® Low Friction PE

SIMONA^® Low Friction PE