SIMONA^® PVDF 2850 Fabric Backed

Polyvinylidene fluoride, polyester backed, high-performance, excellent chemical resistance, exceptionally good aging resistance, high rigidity.

Areas of use:

Chemical and Corrosion Resistance
Semiconductor Processing
Laboratory Equipment

Machining:

Overview material parameters SIMONA^® PVDF 2850 Fabric Backed

Data sheet update

28.04.2020

Specific Gravity (g/cc)
D792

1.78

Water Absorption (%)
D570

<0.03

Tensile Strength at yield (psi)
D638

6,000

Elongation at break (%)
D638

Flexural Modulus (psi)
D790

195,000

Izod Impact (notched) (ft.lbs./in.)
D256

1.0

Shore Hardness D
D2240

Abrasion Resistance (mg/1000)
Taber CS 17

7.5

Coefficient of Friction ((static/dynamic))
C1894

0.20/0.14

Continuous Service Temperature (Maximum) (°F)

261

Melting Point (°F)
D3418

338

Coefficient of Thermal Expansion (in./in./°F)
D696

7.2 x 10^-5

Heat Deflection Temperature at 66 psi (°F)
D648

284

Heat Deflection Temperature at 264 psi (°F)
D648

244

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PVDF 2850 Fabric Backed

Polyvinylidene fluoride, polyester backed, high-performance, excellent chemical resistance, exceptionally good aging resistance, high rigidity.

Areas of use:

Chemical and Corrosion Resistance
Semiconductor Processing
Laboratory Equipment

Machining:

Characteristics

Downloads

back to overview

SIMONA® PVDF 2850 Fabric Backed

SIMONA^® PVDF 2850 Fabric Backed