SIMONA^® PVDF 1000

Polyvinylidene fluoride, high-performance, excellent chemical resistance, exceptionally good aging resistance, high rigidity

Areas of use:

Chemical and Corrosion Resistance
Semiconductor Processing
Laboratory Equipment

Regulatory Code:

FM 4910
UL 94 V0

Certificates:

Flammability FM 4910 yes

Machining:

Overview material parameters SIMONA^® PVDF 1000

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

1.78

Tensile modulus of elasticity (Europe) (MPa)
DIN EN ISO 527

1,950

Notched impact strength (Europe) (kJ/m²)
DIN EN ISO 179

Impact strength (Europe) (kJ/m²)
DIN EN ISO 179-1eU

without break

Dielectric strength (Europe) (kV/mm)
DIN IEC 60254-1

Shore hardness D (15 s) (Europe)
DIN EN ISO 868

Ball indentation hardness (Europe) (MPa)
DIN EN ISO 2039-1

120

Temperature range (Europe) (°C)

0 bis +100

Vicat B (°C)
DIN EN ISO 306

140

Mean coefficient of linear thermal expansion (K^-1)
ISO 11359-2

1.3 x 10^-4

Surface resistivity (Ohm)
DIN IEC 60093

10¹⁴

Fire behaviour DIN 4102

DIN 4102 B2 normal entflammbar (Eigeneinschätzung ohne Prüfzeugnis)

Regulatory Code

FM 4910; UL 94 V0

Elongation at yield (Europe) (%)
DIN EN ISO 527

Flammability FM 4910

yes

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PVDF 1000

Polyvinylidene fluoride, high-performance, excellent chemical resistance, exceptionally good aging resistance, high rigidity

Areas of use:

Chemical and Corrosion Resistance
Semiconductor Processing
Laboratory Equipment

Regulatory Code:

FM 4910
UL 94 V0

Certificates:

Flammability FM 4910 yes

Machining:

Characteristics

Downloads

back to overview

SIMONA® PVDF 1000

SIMONA^® PVDF 1000