SIMONA^® PVC Type I

Rigid material offers normal impact strength, chemical resistance, high rigidity, in an extensive range of gauges and sizes.

Areas of use:

Cabinetry and Outdoor Furniture
Laboratory Equipment
Chemical and Corrosion Resistance

Regulatory Code:

UL 94 V0

Certificates:

Flammability UL 94: V-0, 5V

Machining:

Overview material parameters SIMONA^® PVC Type I

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

1.41

Water Absorption (%)
D570

<0.02

Tensile Strength at yield (psi)
D638

9,000

Tensile Modulus (psi)
D638

486,000

Izod Impact (notched) (ft.lbs./in.)
D256

0.8

Shore Hardness D
D2240

Continuous Service Temperature (Maximum) (°F)

140

Coefficient of Thermal Expansion (in./in./°F)
D696

4.4 x 10^-5

Heat Deflection Temperature at 264 psi (°F)
D648

154

Regulatory Code

UL 94 V0

Flammability UL 94

V-0, 5V

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PVC Type I

Rigid material offers normal impact strength, chemical resistance, high rigidity, in an extensive range of gauges and sizes.

Areas of use:

Cabinetry and Outdoor Furniture
Laboratory Equipment
Chemical and Corrosion Resistance

Regulatory Code:

UL 94 V0

Certificates:

Flammability UL 94: V-0, 5V

Machining:

Characteristics

Downloads

back to overview

SIMONA® PVC Type I

SIMONA^® PVC Type I