SIMONA^® PP-H

Homopolymer material offers permanent-heat stability, long-term rigidity and high chemical resistance. Perfect for use in chemical tank and equipment construction.

Areas of use:

Chemical and Corrosion Resistance
Medical Orthotics and Prosthetics
Laboratory Equipment

Regulatory Code:

Machining:

Overview material parameters SIMONA^® PP-H

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

0.905

Water Absorption (%)
D570

<0.01

Tensile Strength at yield (psi)
D638

4,800

Elongation at break (%)
D638

>100

Flexural Modulus (psi)
D790

195,000

Izod Impact (notched) (ft.lbs./in.)
D256

0.9

Shore Hardness D
D2240

Continuous Service Temperature (Maximum) (°F)

212

Melting Point (°F)
D3418

329

Coefficient of Thermal Expansion (in./in./°F)
D696

8.88 x 10^-5

Regulatory Code

FDA

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PP-H

Homopolymer material offers permanent-heat stability, long-term rigidity and high chemical resistance. Perfect for use in chemical tank and equipment construction.

Areas of use:

Chemical and Corrosion Resistance
Medical Orthotics and Prosthetics
Laboratory Equipment

Regulatory Code:

Machining:

Characteristics

Downloads

back to overview

SIMONA® PP-H

SIMONA^® PP-H