SIMONA^® PP-H AlphaPlus^®

Homopolymer polypropylene, permanent-heat stability, high chemical resistance, perfect for use in chemical tank and equipment construction, good long-term properties, high rigidity in upper temperature range

Areas of use:

Chemical and Corrosion Resistance
Laboratory Equipment

Regulatory Code:

Machining:

Overview material parameters SIMONA^® PP-H AlphaPlus^®

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

0.91

Tensile modulus of elasticity (Europe) (MPa)
DIN EN ISO 527

1,700

Notched impact strength (Europe) (kJ/m²)
DIN EN ISO 179

Impact strength (Europe) (kJ/m²)
DIN EN ISO 179-1eU

without break

Shore hardness D (15 s) (Europe)
DIN EN ISO 868

Temperature range (Europe) (°C)

0 bis +100

Mean coefficient of linear thermal expansion (K^-1)
ISO 11359-2

1.6 x 10^-4

Surface resistivity (Ohm)
DIN IEC 60093

10¹⁴

Fire behaviour DIN 4102

DIN 4102 B2 normal flammability (self-assessment without test certificate)

Regulatory Code

FDA

Elongation at yield (Europe) (%)
DIN EN ISO 527

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PP-H AlphaPlus^®

Areas of use:

Chemical and Corrosion Resistance
Laboratory Equipment

Regulatory Code:

Machining:

Characteristics

Downloads

back to overview

SIMONA® PP-H AlphaPlus®

SIMONA^® PP-H AlphaPlus^®