SIMONA^® PP FRP-3 FM 4910

Flame retardant polypropylene, high chemical resistance, perfect for use in chemical tank and equipment construction, good long-term properties, high rigidity in upper temperature range, FM 4910 listed.

Areas of use:

Semiconductor Processing
Laboratory Equipment
Chemical and Corrosion Resistance

Regulatory Code:

FM 4910

Certificates:

Flammability UL 94: V-0
Flammability FM 4910 Listed

Machining:

Overview material parameters SIMONA^® PP FRP-3 FM 4910

Data sheet update

09.09.2019

Specific Gravity (g/cc)
D792

1.36

Water Absorption (%)
D570

<0.1

Tensile Strength at yield (psi)
D638

2,600

Flexural Modulus (psi)
D790

400,000

Izod Impact (notched) (ft.lbs./in.)
D256

12.0

Shore Hardness D
D2240

Continuous Service Temperature (Maximum) (°F)

200

Heat Deflection Temperature at 66 psi (°F)
D648

240

Regulatory Code

FM 4910

Flammability FM 4910

Listed

Flammability E84

Class A

Comments

This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best knowledge of SIMONA AMERICA Industries LLC (SAI) or obtained from sources believed by SIMONA AMERICA Industries LLC (SAI) to be accurate and SIMONA AMERICA Industries LLC (SAI) does not assume any legal responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any product read its label.

Further information can be found under "Downloads"The data presented in this section are to be seen as a guide and may vary depending on the processing method and test specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20 mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily applicable to products that have undergone downstream processing. The suitability of a material for a specific area of application must be checked by the processor or end user. All technical specifications are provided only as a guide for planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please contact our Technical Service Centre at tsc@simona.de.

SIMONA^® PP FRP-3 FM 4910

Areas of use:

Semiconductor Processing
Laboratory Equipment
Chemical and Corrosion Resistance

Regulatory Code:

FM 4910

Certificates:

Flammability UL 94: V-0
Flammability FM 4910 Listed

Machining:

Characteristics

Downloads

back to overview

SIMONA® PP FRP-3 FM 4910

SIMONA^® PP FRP-3 FM 4910